To introduction some of the classification and characteristics of storage shelves
1, the cantilever rack:
Features: the cantilever rack with special section steel post, single-sided and double-sided type, with high strength and stress of the cantilever is the best solution to a variety of storage materials with long and irregular materials, such as profiles, tubes, plates and so on. Particularly suitable for the storage space is not high, improve the utilization rate of the warehouse. Warehouse shelves available in general forklift operation, but also require wide channels, can also be equipped with crane for deposit. Cantilever racking is mainly used for storage of long shaped material, such as profiles, pipes, plates, cable, pillar with H type steel or cold rolled steel, cantilever with square tube, cold-formed steel and H-shaped steel and between the cantilever and the upright posts by plug or bolt connection type, base and upright posts connected by a bolt type, the base of the cold rolled steel and H-shaped steel. Cargo access is carried out by a forklift, a vehicle or an artificial. Shelf height is usually within 2.5 meters (as by forklift access can be as high as 6 meters), the cantilever length of 1.5 meters, each arm load is usually within 1000kg. Such shelves are used for machinery manufacturing industry and building materials supermarkets, etc..
2, medium shelf:
Medium shelf is firm and strong, the load bearing capacity is large, and the middle shelf is widely used in shopping malls, supermarkets, enterprises and institutions. Usually divided into the amount of A - type, the amount of B - type shelf and the amount of C - type shelf. Generally can be disassembled and assembled, the plate height can be adjusted; bearing capacity of 200-800kg; shelf all the metal parts all over the anti rust treatment, the surface by electrostatic spraying; medium-sized shelf is suitable for large and medium sized storage goods.
One, suitable for manual access to goods, low cost, safe and reliable, assembly, disassembly simple features, can be used alone, can also be free to splice into a variety of arrangements.
Two, the column is composed of two columns from the cross brace, the diagonal brace to the nylon bolt connection, it can effectively prevent the bolt loose after the trigger instability;
Third, the crossbeam adopt special cold rolling P type closed beam. This structure has advantages of simple, reliable, light weight, strong bearing capacity and low cost. When the jaw is connected with the column, it is equipped with special design safety pin. It can ensure that the beam will not fall off after the impact of the external force, and the most popular strip plate, which has the advantages of strong bearing capacity, high wear resistance, easy replacement and low maintenance cost. Laminates can be made of steel laminates, wood laminates and steel mesh, etc.. Laminate laid on the cross beam, with a great load, the beam can be laid between the network and a variety of partitions.
3, heavy shelves:
Introduction: heavy shelves by the columns, beams, transverse bracing, bracing and self-locking bolt assembly and, warehouse shelves can effectively prevent the loosening of the bolts caused shelf instability; the crossbeam adopt special cold rolling P type closed beam; the structure is simple and reliable, light weight, bearing capacity and low cost characteristics of; column card and column connection with special design the safety pin, you can ensure that the beam impacted by external force and will not fall off; laminates using the strip plate, with bearing capacity is strong, wear-resistant, replacement simple, low maintenance cost. Use: heavy shelf, safe, reliable, easy to assemble and disassemble. It is suitable for manual access, and it is suitable for manual storage box type goods, or with parts box, turnover box, which is loaded with scattered heavy goods.
Characteristic
1, heavy shelves used in various industries, low cost, safe and reliable, assembly, disassembly is simple, can be used alone, but also can be used in the form of the main, vice.
2, heavy shelf column by column, transverse bracing, bracing connected with bolts and; column and a p type closed beam inserting rack, the safety pin is fixed, the structure is simple and reliable; steel plate is arranged on the transverse beam formed on the rack. Each layer can be adjusted to 75mm step by step.
3, heavy shelves can be with the size of the beam, the thickness of the plate, the number of reinforcement to determine the level of the load requirements, in the relative length and material requirements of the case, the maximum load can reach 2500kg/ layer.
4, heavy shelves in general, the height of the column is not more than 12 meters, and can be built on the shelves of the attic shelves. Production process: the specification of heavy duty rack column is: 55 x 47 x 2.0mm special shelf column profile. Adopt high quality steel strip through Kaiping, automatic rolling, punching, punching, and then according to the customer specified height cut off. The beam is made of cold rolled P type closed beam, specifications are: 50 x 30, 64 x 40, 80 x 50 three specifications. Is a kind of cold roll industry specifically for the shelf production of standard products. After the repurchase according to customer size material, welding rack connected with a special column to catch, can form a semi-finished grinding. Heavy shelf plate using high quality cold plate (SPCC) by Kaiping, longitudinal shear, bending forming, welding to strengthen the production of steel. Heavy shelf column and plate processed into semi-finished products, into the blasting, oil removal can be carried out with. After the completion of the packaging and delivery.
www.bjstb.com
